Sennheiser EM 300 G3 Instruction Manual download pdf (Page 13)

Using the bodypack transmitter

To establish a transmission link, proceed as follows:

1. Switch the receiver on (see the instruction manual of the receiver).

2. Switch the bodypack transmitter on (see below).

The transmission link is established and the display backlighting of

the receiver changes from red to orange.

Switching the bodypack transmitter on/off

왘 Push the two catches 쐉 and open the battery compartment cover 쐈.

To switch the bodypack transmitter on (online operation):

To switch the bodypack transmitter off:

To switch the bodypack transmitter on and to deactivate the RF signal on

switch-on (offline operation):

왘 Briefly press the ON/OFF button 씉.

The bodypack transmitter transmits an RF signal. The stan-

dard display “Frequency/Name” appears on the display

panel. The red ON LED 쐄 lights up and the transmission

icon 햵 is displayed.

You can switch the bodypack transmitter on and deactivate the

RF signal on switch-on. For more information, see below.

왘 Press the ON/OFF button 씉 until “OFF” appears on the

display panel.

The red ON LED 쐄 goes off and the display panel turns off.

When in the operating menu, pressing the ON/OFF button 씉 will

cancel your entry (ESC function) and return you to the current

standard display.

왘 Press the ON/OFF button until “RF Mute On?” appears on the

display panel.

왘 Press the SET button.

The transmission frequency is displayed but the bodypack

transmitter does not transmit an RF signal. The transmission

icon 햵 is not displayed

Use this function to save battery power or to prepare a bodypack

transmitter for use during live operation without causing inter-

ference to existing transmission links.

햵

씉

쐉

쐈

쐄

ON/OFF

SET

MHz

543.200

ew300 G3

MUTE

햵

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 31 32

Comments to this Manuals

No comments

Sennheiser EM 300 G3 Instruction Manual Page 13

Comments to this Manuals

Related products and manuals for Two-way radios Sennheiser EM 300 G3