2/8/2012 20 Retsch GmbH
Operating software display
When the buttons described below are pressed in the stand-by
mode the actual software version is displayed.
Display operating software:
Press buttons + "frequency 1/s" (+ M) and SET
simultaneously and keep pressed.
„S“ appears in the display „memory“ and the actual software
version appears in the display “frequency 1/s”.
Leave operating software display :
Press STOP button.
Replacing the machine fuses
The following visible type fuses are required for the MM 400:
2 MT 3.15 A fuses
Replacing the fuses
• Unplug mains plug from the machine socket A
• By pressing the locking devices on the side of the fuse
compartment B these are released and can be pulled out.
• Replace fuses
• Insert fuse holder B so that it engages.
Working instructions
Target group: operators
General
The MM 400 is an ultramodern, high performance product
from Retsch GmbH.
Owing to the large selection of accessories the oscillation
mill, type MM 400, is a machine with many different
application possibilities in laboratories in industry and
research. It is used mainly in the chemical and
pharmaceutical sectors and in mineralogical and biological
applications etc.
Comments to this Manuals