Sennheiser SK 50 - 04-05 Specifications download pdf (Page 29)

Changing the microphone module

 First remove the battery or the rechargeable battery and leave

the radiomicrophone open.

 Unscrew the sound inlet basket.

 Remove the screw and put it to one side.

 Remove the microphone module by pulling it out of the housing

as shown. Do not touch the contacts!

 Insert the new module.

 Secure the capsule by tightening the screw.

Note:

The screw mechanically secures the microphone capsule. If the

screw is missing, malfunctions may occur during tough use.

 Put on the sound inlet basket and identification ring supplied

with the new microphone headand screw it tight.

 Insert the batteries/accupack.

 Close the radiomicrophone and put it into operation.

Note:

Microphone capsule, sound inlet basket and foam insert form an

acoustic unit and must therefore always be exchanged all

together. Each microphone head comes with a color-coded

identification ring to distinguish different microphone heads

from each other (green = MD 835, blue = MD 845, red = ME 865).

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 61 62

No comments

Sennheiser SK 50 - 04-05 Specifications Page 29