Sennheiser Rack-mount Receiver EM 300 G3 User Manual download pdf (Page 15)

Putting the receiver into operation

Mounting the receiver into a 19” rack

Rack mounting

one receiver

왘 Secure the rack mount “ears”  of the supplied GA 3 rack adapter to

the receiver as described on page 12.

왘 Secure the blanking plate of the supplied GA 3 rack adapter to one

of the rack mount “ears”  using two recessed head screws (M 6x10).

Do not fit the device feet when mounting the receiver into a

19” rack.

CAUTION! Risks when rack mounting the receiver!

When installing the device in a closed or multi-rack assembly, please

consider that, during operation, the ambient temperature, the mechanical

loading and the electrical potentials will be different from those of devices

which are not mounted into a rack.

왘 Make sure that the ambient temperature within the rack does not

exceed the permissible temperature limit specified in the specifications

(see page 54).

왘 Ensure sufficient ventilation; if necessary, provide additional ventila-

tion.

왘 Make sure that the mechanical loading of the rack is even.

왘 When connecting to the power supply, observe the information indi-

cated on the type plate. Avoid circuit overloading. If necessary, provide

overcurrent protection.

왘 When rack mounting, please note that intrinsically harmless leakage

currents of the individual mains units may accumulate, thereby

exceeding the allowable limit value. As a remedy, ground the rack via an

additional ground connection.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 61 62

No comments

Sennheiser Rack-mount Receiver EM 300 G3 User Manual Page 15