Sennheiser Tourguide Wireless Transmitter SR 2020 D User Manual download pdf (Page 14)

Putting the SR 2020 D into operation

Mounting only one

SR 2020 D

When mounting only one transmitter into the rack, use the

blanking plate  instead of the second transmitter.

 Hook the two rack mount “ears”  to the front panel of the

transmitter.

 Secure the rack mount “ears”  to the transmitter using two

of the supplied recessed head screws (M 3x6) respectively.

 Secure the blanking plate  to one of the rack mount

“ears”  using two of the supplied recessed head screws

(M 6x10).

 If you are not front mounting the BNC output connector,

insert the two blanking plugs  into the holes of the

blanking plate.

 Slide the transmitter into the 19” rack.

 Secure the rack mount “ears”  to the rack.

Connecting the transmitter to the mains

 Pass the cable through the cable grip .

 Connect the cable of the mains unit to the DC IN socket  of

the transmitter.

 Plug the mains connector into the wall socket.

Connecting external devices

You can connect either a microphone (Mic) or an external audio

source (Line, e.g. CD or MP3 player) to the transmitter.

To do so, use a suitable audio cable with a length of up to 3 m.









1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 31 32

No comments

Sennheiser Tourguide Wireless Transmitter SR 2020 D User Manual Page 14