Sennheiser SI 234 - ANNEXE 802 Operations Instructions Page 399

  • Download
  • Add to my manuals
  • Print
  • Page
    / 440
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 398
DA 42 NG AFM Airplane Description
Doc. No. 7.01.16-E Rev. 3 01-Apr-2014 Page 7 - 51
Alternator Control:
Each alternator has an alternator control unit. It measures the alternator output voltage
and controls the current through the alternator field coils via a pulse-width modulated
signal. To keep the output voltage stable in all load and speed situations, the alternator
field signal is modulated accordingly.
The left alternator regulator also measures the power output of both (LH and RH)
alternators via separate current sensors. Based on the current measurements, the LH
alternator regulator controls the output of its associated alternator, providing paralleling
between the alternators.
The alternator control unit includes a comprehensive set of diagnostic functions that will
warn the operator using a caution message (L/R ALTN FAIL) on the G1000 PFD in case
of over- or undervoltage as well as a couple of other internal warning levels.
Storage
Main battery power is stored in a 24 V, 13.6 Ah lead-acid battery mounted on the right-aft
side of the front baggage compartment. The main battery is connected to the HOT
BATTERY BUS and to the BATTERY BUS via the 'battery'-relay which is installed in the
relay junction box on the center-aft side of the front baggage compartment.
The battery relay is controlled with the ELECT. MASTER switch which is located on the
left-hand side of the instrument panel.
In addition, a non-rechargeable dry battery is installed as a further source of power for
the backup attitude gyro (artificial horizon) and the flood light. When the EMERGENCY
switch is set to ON, these two systems are supplied with power for at least 1.5 hours,
independent of all other electrical consumers. During each 100 hour inspection, this battery
is checked for proper functioning. Every 2 years or after use (broken seal on the switch)
the battery package must be replaced.
Page view 398
1 2 ... 394 395 396 397 398 399 400 401 402 403 404 ... 439 440

Comments to this Manuals

No comments