Sennheiser SDC 8000 SYS User Manual download pdf (Page 73)

Voting

Reading chip cards

왘 Insert the chip card into the chip card slot of any desired console. The

chip must point downwards.

The green LED on the chip card icon of the corresponding consoles

lights up. The consoles with a chip card inserted into their chip card slot

are displayed in white in the synoptic view.

왘 From the “Configuration” menu, choose “Badge programming”.

The input mask opens.

왘 In the “Micro No.” field, enter the four-digit microphone number of the

console whose inserted chip card you want to read.

왘 Click the “Read” button.

The data on the chip card are read and displayed in the input mask.

Changing chip card data

왘 Read the chip card as described in the previous section.

The data on the chip card are displayed in the input mask.

왘 Change the desired data by editing them in the input mask.

왘 Click the “Write” button.

The changed data are written to the chip card.

Ending the program

To end the program:

왘 Click “End” on the menu bar.

The program is ended. If consoles are active when you exit the program,

they remain active. The conference is not interrupted, but is now

controlled via the central unit only.

1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 97 98

No comments

Sennheiser SDC 8000 SYS User Manual Page 73