Normal Operating
Procedures
DA 42 NG AFM
Page 4A - 24 Rev. 3 01-Apr-2014 Doc. No. 7.01.16-E
4A.6.4 BEFORE TAXIING
1. AVIONIC MASTER .................... ON
2. Power lever .......................... as required, max. 50% if engine
temperature below green range
3. Electrical equipment ................... ON as required
4. Flight instruments and avionics ........... set as required
5. Flood light ........................... ON, test function, as
required
6. Pitot and stall warn heating .............. ON, check annunciation
NOTE
The stall warning switch gets slightly warmer on ground only
and STAL HT FAIL is indicated on the PFD.
7. Pitot and stall warn heating .............. OFF
8. Strobe lights (ACLs) ................... check ON
9. Position lights, landing and taxi lights ...... as required
CAUTION
When taxiing at close range to other airplane, or during night
flight in clouds, fog or haze, the strobe lights should be
switched OFF. The position lights must always be switched
ON during night flight.
10. Primary flight display (PFD) ............. NO AUTOPILOT
ANNUNCIATIONS
11. Autopilot disconnect tone ............... NOTE
CONTINUED
Comments to this Manuals