Sennheiser SI 234 - ANNEXE 802 Operations Instructions download pdf (Page 204)

100

101

Normal Operating

Procedures

DA 42 NG AFM

Page 4A - 46 Rev. 3 01-Apr-2014 Doc. No. 7.01.16-E

e) Navigation Capture and Track:

1. Navigation source ..................... select VOR or GPS using

CDI button on PFD

2. Course bearing pointer ................. set using course knob

(VOR only)

3. Intercept heading ..................... establish in HDG or ROL

mode (if required)

4. Mode controller ...................... select NAV on mode controller

5. Green or white VOR or GPS annunciation . . note on PFD

6. Vertical mode and reference ............ select on mode controller

NOTE

If the Course Deviation Indicator (CDI) is greater than one

dot from center, the autopilot will arm the NAV mode and

indicate VOR or GPS in white on the PFD. The pilot must

ensure that the current heading will result in a capture of the

selected course. If the CDI is one dot or less from center, the

autopilot will enter the capture mode when the NAV button

is pressed and annunciate VOR or GPS in green on the PFD.

END OF CHECKLIST

1 2 ... 199 200 201 202 203 204 205 206 207 208 209 ... 439 440

Comments to this Manuals

No comments

Sennheiser SI 234 - ANNEXE 802 Operations Instructions Page 204

Comments to this Manuals