Sennheiser SI 234 - ANNEXE 802 Operations Instructions Page 435

  • Download
  • Add to my manuals
  • Print
  • Page
    / 440
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 434
DA 42 NG AFM
Handling, Care,
Maintenance
Doc. No. 7.01.16-E Rev. 3 01-Apr-2014 Page 8 - 11
8.6.2 CANOPY AND REAR DOOR
The canopy, rear door and rear window should be cleaned with 'Plexiklar' or any other
acrylic glass detergent if available; otherwise use lukewarm water. Final cleaning should
be carried out with a clean piece of chamois leather or soft cloth. Never rub or polish dry
acrylic glass.
8.6.3 PROPELLER
Damage and malfunctions during operation must be inspected by authorized personnel.
Surface
The manufacturer uses PU paint or acrylic paint which is resistant to almost any solvent.
The blades may be treated with commercial automotive cleaning agents or preservatives.
The penetration of moisture into the wooden core must be avoided by all means. Should
doubts arise, an appropriately rated inspector must be consulted.
8.6.4 ENGINE
Engine cleaning is part of the scheduled inspections.
8.6.5 INTERIOR SURFACES
The interior should be cleaned using a vacuum cleaner. All loose items (pens, bags etc.)
should be removed or properly stored and secured.
All instruments can be cleaned using a soft dry cloth. Plastic surfaces should be wiped
clean using a damp cloth without any cleaning agents.
The leather interior should be treated with leather sealer within 3 months since new, and
then at intervals of 3 to 6 months. Clean the leather interior with an appropriate mild leather
cleaning agent and a soft cleaning brush for leather.
Note that the acrylic glass windows transmit the ultraviolet radiation from the sun.
Page view 434

Comments to this Manuals

No comments