Sennheiser Comfort calls Instruction Manual download pdf (Page 27)

Using the headset system

Ending a call

왘 Disconnect the wireless link between headset and base station (see

page 23).

If you are using handset lifter/electronic hook switch, the call is

automatically ended.

If you are not using a handset lifter/electronic hook switch:

왘 Hang up the handset or press the “end call” button on your fixed line

phone.

Transferring a call from the headset to the fixed line phone and vice versa

This function is only available if you are not using a handset lifter/

electronic hook switch or if your telephone supports this function.

If a wireless link is established (see page 23):

왘 Speak into the headset.

If no wireless link is established (see page 23):

왘 Speak into the handset.

Calling via the PC using the headset

Accepting an incoming PC call

If you receive a call on your softphone:

왘 Establish a wireless link between headset and base station (see

page

23).

If the call control function of your softphone is supported, the call is

automatically accepted (see page

15).

If your softphone does not support call control:

왘 Accept the call using your softphone.

If you receive a call and the call control function of your softphone

is supported by the HeadSetup software (see page

15), you hear a

ring tone in the headset and the LED of the PC button  flashes

white.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 44 45

No comments

Sennheiser Comfort calls Instruction Manual Page 27