Sennheiser CONFERENCE AND INFORMATION SYSTEMS SDC 3000 Specifications download pdf (Page 11)

Safety information

The Sennheiser SDC digital conference system is state of the art and has

been designed to meet the regulations in force. Nevertheless, the

individual components of the conference system can cause danger for

persons and material assets if:

y the conference system is not used as intended,

y the conference system is set up by personnel not familiar with the safety

regulations,

y the conference system is converted or altered incorrectly,

y the safety instructions are not observed.

For your own safety, please observe the following instructions:

y Ensure sufficient air circulation in the vicinity of the power supply units

and the central units. Do not cover any air vents. There must be at least

10 cm (3.9 in.) of open space around the air vents of the power supply

units and central units.

y Place the components of the conference system on flat surfaces only.The

central unit may be placed in a rack.

y The components of the conference system are not splash-proof. Do not

place any containers/tanks containing water or similar liquids on top of

the components.

y Disconnect all power supply units and central units from the mains by

removing the plug before cleaning the components of the conference

system.

y Clean the components of the conference system with a damp cloth only.

Do not use solvents as they can damage the surfaces.

y Only use the connection cables available from Sennheiser electronic

GmbH (see “The system cables” on page25). Sennheiser makes no

warranty as to cables not manufactured by Sennheiser.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 125 126

No comments

Sennheiser CONFERENCE AND INFORMATION SYSTEMS SDC 3000 Specifications Page 11