Sennheiser CONFERENCE AND INFORMATION SYSTEMS SDC 3000 Specifications download pdf (Page 21)

SDC 3000 CU central unit

The central unit serves to manage conference systems with up to 150

conference consoles. For larger conference systems with a maximum of

600 consoles, you can interconnect up to four central units via the system

cables (see “Possible expansion stages” on page 27).

The central unit’s menu control allows you to:

y set the conference system to one of the three conference modes

“Automatic”, “Overrun”, or “Request” (see “Selectable conference

modes” on page 34)

y configure a maximum of four chairperson units,

y set the speaker limit (max. 6),

y set the maximum speaking time (0.5 to 10 minutes or unlimited),

y take and evaluate votes,

y adjust the audio settings for the XLR input and XLR output,

y save the settings of up to five different configurations for the

conference system,

y load settings from a saved configuration or load the factory-preset

default configuration.

Via the XLR-3F socket (AUDIO IN)  of the central unit you can connect

microphones with suitable preamplifiers or you can feed audio signals

from additional audio equipment (e.g. mixing console or similar ) to the

conference system. The output signal of the floor channel is available at

the XLR-3M audio output (AUDIO OUT) . Via the XLR-3M audio output

you can:

y connect a PA system and transmit the audio signal of the floor channel

via the PA system,

y transmit the audio signal of the floor channel as “original soundtrack” to

a broadcasting station.

Via the 25-pin sub-D connectors (INTERPRETER IN)  and (INTERPRETER

OUT) , you can connect an interpretation system to the SDC conference

system. This interpretation system should deliver a balanced input signal

of +6 dB (10 dB

max.). Apart from the floor language transmitted on

channel 0, the conference participants can choose from up to 11 additional

languages transmitted on channels 1–11.

Via one of the two 25-pole sockets (INTERPRETER OUT)  or (CONFERENCE

OUT) , you can connect the control of an infrared transmitter, allowing

guests or participants who don’t have their own conference console to

follow the conference via infrared headphones. If an interpretation system

is connected, these guests or participants can also choose between the

floor channel and up to 11 additional language channels.

Optionally, you can – via the two 25-pole sub-D sockets (CONFERENCE

OUT)  or (INTERPRETER OUT)  – transmit the floor language together

with the corresponding translations directly to broadcasting and TV

stations, so that broadcasting and TV stations worldwide can transmit

contributions to the conference in the desired language.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 125 126

Comments to this Manuals

No comments

Sennheiser CONFERENCE AND INFORMATION SYSTEMS SDC 3000 Specifications Page 21

Comments to this Manuals

Related products and manuals for Unknown Sennheiser CONFERENCE AND INFORMATION SYSTEMS SDC 3000