Sennheiser CONFERENCE AND INFORMATION SYSTEMS SDC 3000 Specifications download pdf (Page 14)

The components of the SDC conference system

The conference console

The conference console features a built-in loudspeaker, allowing the

participant to directly hear all audio information, e.g. speeches,

presentations or any other audio material. This decentralized

“loudspeaker system” ensures excellent sound quality at a pleasant

volume throughout the entire room.

The console’s electret microphone transmits every word in excellent audio

quality. The red signal light ring on the microphone serves as an indicator

of who is allowed to take the floor, who has “applied” for a comment, etc.

The conference participants can participate in voting sessions from the

consoles.

The design of the delegate and the chairperson units is identical. Any

delegate unit can quickly and easily be configured as a chairperson unit

with additional functions. Two control keys, which are otherwise inactive,

are assigned special functions, enabling the chairperson to control the

entire conference. For large conferences, up to four chairperson units may

be configured.

The conference consoles are available in two different versions – with and

without switchable interpretation channels.

The consoles are connected in series. One power supply can comprise up to

25 conference consoles (expansion stage 1). You can, however, set up

conference systems with up to 600 consoles.

The central unit

The central unit is the core of the SDC conference system and, at the same

time, serves as an interface for additional audio systems.

During the conference, the language channels are managed via the central

unit. During votings, the central unit serves to count the votes and the

result is shown on the central unit’s display. Via the central unit’s

operating menu, a delegate unit can be configured as a chairperson unit.

On the central unit, you can choose between the three conference modes

“Automatic”, “Overrun” and “Request”.

The central unit has a built-in power supply for powering up to 25

conference consoles and is therefore sufficient for setting up a basic

conference system (expansion stage 1). For larger conference systems,

additional power supplies and up to three additional central units can be

connected.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 125 126

No comments

Sennheiser CONFERENCE AND INFORMATION SYSTEMS SDC 3000 Specifications Page 14