Sennheiser CONFERENCE AND INFORMATION SYSTEMS SDC 3000 Specifications download pdf (Page 98)

Specifying the technical details and the conference mode

100

[Communication] Specifying the COM port

You have to specify the COM port of your Central PC to which you have

connected the central unit.

 Open the “Environment Configuration” dialog box (see “Specifying the

technical details and the conference mode” on page 98).

 In the “Communication” box, click the “Com-Port” list box’s down

arrow and select the COM port to which you have connected the

central unit.

With most computers, the serial interface to which the central unit is

connected corresponds to COM port “1” or “2”.

 Close the “Environment Configuration” dialog box by clicking .

[View-PC IP] Entering the address of the View-PC (optional)

If you want to use a View-PC for displaying important information to all

conference participants via a large screen or a projector, you have to enter

the IP address of this PC.

 Open the “Environment Configuration” dialog box (see “Specifying the

technical details and the conference mode” on page 98).

 Click the “View-PC IP” text box and enter the IP address.

 Close the “Environment Configuration” dialog box by clicking .

Note:

The viewing function is not supported by this program version. If you

want to use a View-PC, please contact Sennheiser electronic with

regard to a software upgrade.

[DU] Setting the volume for the consoles’ built-in loudspeakers

You have to set the volume for the consoles’ built-in loudspeakers. Set the

volume to such a level that all participants can clearly hear all audio

information – however, do not set the volume too high in order to avoid

feedback noise. The volume setting can later also be changed via the

conference management program:

 Open the “Environment Configuration” dialog box (see “Specifying the

technical details and the conference mode” on page 98).

 In the “DU” box, set the “Vol.” control to the desired volume.

The volume can be adjusted in 16 steps.

 Close the “Environment Configuration” dialog box by clicking .

1 2 ... 93 94 95 96 97 98 99 100 101 102 103 ... 125 126

No comments

Sennheiser CONFERENCE AND INFORMATION SYSTEMS SDC 3000 Specifications Page 98