Sennheiser Tourguide Charger L 2021-40 User Manual download pdf (Page 10)

Putting the charger into operation

Installing the charger

The housing of the charger is designed so that it fits into a 19” rack. The

charger can also be installed in a cabinet or similar.

왘 Use eight screws to fasten the charger.

CAUTION! Risks when rack mounting the charger!

When installing the device in a closed or multi-rack assembly,

please consider that, during operation, the ambient temper-

ature, the mechanical loading and the electrical potentials

will be different from those of devices which are not

mounted into a rack.

왘 The ambient temperature within the rack, cabinet or

similar must not exceed the temperature limit specified in

the specifications.

왘 When installing the device, take good care not to affect

the ventilation required for safe operation. If necessary,

provide additional ventilation.

왘 Make sure the mechanical loading of the rack is even to

avoid a hazardous condition.

왘 When connecting the device to the power supply, observe

the information indicated on the type plate. Avoid circuit

overloading. If necessary, provide overcurrent protection.

왘 Ensure a reliable mains ground connection of the device

by taking appropriate measures – especially when you are

using an extension cable or a multi-outlet power strip.

왘 When installing the device in a closed or multi-rack

assembly, please note that intrinsically harmless leakage

currents of the individual devices may accumulate,

thereby exceeding the allowable limit value. As a remedy,

ground the rack via an additional ground connection.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16 17 18

No comments

Sennheiser Tourguide Charger L 2021-40 User Manual Page 10