Sennheiser CONFERENCE SYSTEM SDC 8000 User Manual download pdf (Page 85)

Configuring the SDC 8000 system

Modifying the currently active interpreter configuration

You can modify the following features of the currently active interpreter

configuration:

y the main target language (A-channel)

y the second target language (B-channel)

y the auto-relay interpretation for the interpreters (auto-floor)

To modify the currently active interpreter configuration:

1. From the central unit’s operating menu, choose “

Conference”,

“

Configuration” and ”Current” one after the other.

The “

Select Booth” menu appears.

2. (Carry out this step once for each booth.)

Choose the booth number and modify:

y the main target language as described under “Configuring the main

target language (A-channel) of a booth” on page 88.

y – if necessary – the second target language as described under

“Configuring the second target language (B-channel) of a booth” on

page 88.

y – if necessary – the auto-relay interpretation for the interpreters as

described under “Enabling the auto-relay interpretation function

(Auto-floor)” on page 89.

3. After you have configured the last booth, press the EXIT key repeatedly

until the “

Save Config.” menu appears.

4. Choose “

as Config 1” or “as Config 2” and press the ENTER key.

The modified interpreter conifguration is saved and becomes effective

immediately.

Attention!

If you exit the “

Save Config.” menu by pressing the EXIT key, the

interpreter configuration will not be saved! The interpreter

configuration remains unchanged!

Loading a previously saved interpreter configuration

To load a previously saved interpreter configuration:

왘 From the central unit’s operating menu, choose “

Conference”,

“

Configuration” and ”Load” one after the other.

The “

Load” menu appears.

왘 Choose “

Configuration 1” or “Configuration 2” and press the

ENTER key.

The interpreter configuration is loaded. Since the options and the

initialization of the interpreter consoles on the central unit have

already been saved in this interpreter configuration, your

interpretation system is immediately operational. It is therefore not

necessary to initialize the interpreter consoles again.

Configuration

Current

Select Booth

Booth = 01

Save Config.

as Config 1

Press ENTER to Save

Configuration

3 Load

1 2 ... 80 81 82 83 84 85 86 87 88 89 90 ... 115 116

Comments to this Manuals

No comments

Sennheiser CONFERENCE SYSTEM SDC 8000 User Manual Page 85

Comments to this Manuals

Related products and manuals for Microphones Sennheiser CONFERENCE SYSTEM SDC 8000