Sennheiser EW 335 G3 Instruction Manual download pdf (Page 16)

Putting the devices into operation

SK 300 bodypack transmitter

Inserting the batteries/accupack

For powering the bodypack transmitter, you can either use two 1.5 V AA size batteries or the

rechargeable Sennheiser BA 2015 accupack.

 Push the two catches  in the direction of the arrows and open the battery compart-

ment cover .

 Insert the two batteries or the accupack as shown above.

Observe correct polarity when inserting the batteries/accupack.

 Close the battery compartment.

The battery compartment cover  locks into place with an audible click.

Charging the accupack

To charge the BA 2015 accupack:

 Insert the bodypack transmitter into the L 2015 charger (optional accessory).

Connecting the microphone cable/line cable

The audio input is designed for the connection of both condenser microphones and other

audio sources. DC powering of the condenser microphones is via the audio input.

 Use one of the recommended Sennheiser microphones or the optional CL 2 line cable.

 Connect the 3.5 mm jack plug  from the Sennheiser microphone or line cable to the

3.5 mm jack socket MIC/LINE .

 Lock the 3.5 mm jack plug by screwing down the coupling ring  of the cable.

 Via the operating menu, adjust the sensitivity of the microphone/line input.

The L 2015 charger can only charge the combination BA 2015 accupack/bodypack

transmitter. Standard batteries (primary cells) or individual rechargeable battery

cells cannot be charged.







1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 41 42

No comments

Sennheiser EW 335 G3 Instruction Manual Page 16