10
Using the radio microphone
Changing the color-coded protection ring
The color-coded protection ring 쐊 prevents the multi-function switch 쐈
from accidental operation. Protection rings 쐊 in different colors are avail-
able as accessories (information on accessories can be found on our web
site at www.sennheiser.com). The protection rings allow you to clearly
identify each radio microphone.
Remove the color-coded protection ring 쐊 as shown.
Put on a new protection ring 쐊 as shown.
Using the radio microphone
To establish a transmission link, proceed as follows:
1. Switch the receiver on
(see the instruction manual of the receiver).
2. Switch the radio microphone on (see below).
The transmission link is established and the display backlighting of
the receiver changes from red to orange.
Switching the radio microphone on/off
To switch the radio microphone on (online operation):
To switch the radio microphone off:
If necessary, deactivate the lock mode (see page 11).
Briefly press the ON/OFF button 쐉.
The radio microphone transmits an RF signal. The transmis-
sion icon 햵 is displayed.
The red ON LED 쐎 lights up and the standard display
“Frequency/Name” appears on the display panel.
You can switch the radio microphone on and deactivate the
RF signal on switch-on. For more information, see below.
Press the ON/OFF button 쐉 until “OFF” appears on the
display panel. The red ON LED 쐎 goes off and the display
panel turns off.
쐊 쐊
쐊 쐊
쐉
쐎
ON/OFF
ON/OFF
Comments to this Manuals