Sennheiser Microphone SDC 8200 User Manual download pdf (Page 100)

Configuring the SDC 8200 system

100

왘 Start initializing the interpreter consoles by pressing the MIC key  of

interpreter console 1 in booth 1.

The red signal light ring of the interpreter console stops flashing. The

booth and desk numbers of all subsequent interpreter consoles are

automatically increased according to the preset number of booths and

the preset number of interpreter consoles per booth.

왘 Continue by pressing the MIC key  of interpreter console 2 in booth 1,

and so on.

왘 If all booth and desk numbers are assigned correctly, press the ENTER

key on the central unit to save this configuration.

The displays of the interpreter consoles show the languages assigned

to the A-channel and the B-channel and other related information (see

example illustration on the left).

The interpreter consoles are now ready for operation.

2. Alternatively, you can assign the booth and desk number of an inter-

preter console individually (see “Manually assigning an interpreter

console an individual booth number” on page 100 and “Manually

assigning an interpreter console an individual desk number (inter-

preter console number)” on page 101).

Manually assigning an interpreter console an individual booth number

To manually assign an interpreter console an individual booth number

(

BOOTH):

왘 From the central unit’s operating menu, choose “

Interpretation”,

“

Initialise Units” and “Full Init” one after the other.

왘 Press the RELAY 1 key  of the desired interpreter console and keep it

pressed.

왘 While keeping the RELAY 1 key pressed, press the “MENU 왖” or

“MENU 왔” menu selection key  until the desired booth number

(BOOTH) is shown on the display.

왘 Press the MIC key  to transmit the selected booth number to the cen-

tral unit.

Note!

If an error occurs during initialization, the text “

Init Refused” is

shown on the displays of the interpreter consoles. In this case, reinitial-

ize the interpreter consoles.

왘 If all booth and desk numbers are assigned correctly, press the ENTER

key on the central unit to save this configuration.

Full Init

Press ENTER to save

01 ENG

02 ARA

00 00 00 00

FLO FLO FLO FLO

Initialise Units

1 Full Init





Press Mic to confirm

BOOTH DESK

02 01

Full Init

Press ENTER to save

1 2 ... 95 96 97 98 99 100 101 102 103 104 105 ... 127 128

Comments to this Manuals

No comments

Sennheiser Microphone SDC 8200 User Manual Page 100

Comments to this Manuals

Related products and manuals for Musical Equipment Sennheiser Microphone SDC 8200