Sennheiser Microphone SDC 8200 User Manual download pdf (Page 97)

Configuring the SDC 8200 system

왘 From the central unit’s operating menu, choose “Interpretation”,

“

Options” and “Mode between Booth” one after the other.

The current mode in shown on the display.

왘 Choose the desired mode.

You can choose between the modes “

Mixed”, “Override” and “Toggle

Override”.

– Choose “

Mixed” if interpreters in different booths interpret into the

same target language and work in turns.

When two interpreters simultaneously interpret into the same lan-

guage, the red signal light ring  and the “Microphone active”

LED  on their consoles light up.

– Choose “

Override” if activating an interpreter console in another

booth turns off the currently active interpreter console. The inter-

preter console that was just turned off can only be turned on again if

the interpreter console by which it was turned off is deactivated.

– Choose “

Toggle Override” if activating an interpreter console in

another booth turns off the currently active interpreter console. The

interpreter console that was just turned off can be turned on again

any time by pressing the MIC key .

왘 Press the ENTER key to save your setting.

Configuring the operating mode within a booth

To determine whether or not the interpreter consoles installed within a

booth can be simultaneously active:

왘 From the central unit’s operating menu, choose “

Interpretation”,

“

Options” and “Mode in Booths” one after the other.

The current mode in shown on the display.

왘 Choose the desired mode.

You can choose between the modes “

Mixed” and “Toggle Override”.

– Choose “

Mixed” if several interpreters in the same booth interpret

into the same language. When two interpreters simultaneously

interpret into the same language, the red signal light ring  and the

“Microphone active” LED  on their consoles light up.

– Choose “

Toggle Override” if activating another interpreter console

within a booth turns off the currently active interpreter console. The

interpreter console that was just turned off can be turned on again

any time by pressing the MIC key .

Configuring the language options for the interpreter booths

The “

Configuration” menu item on the “Interpretation” menu allows

you to configure the language options for the interpreter booths:

y the main target language (A-channel)

y the second target language (B-channel)

y the auto-relay interpretation for the interpreters (auto-floor)

왘 After having configured the language options as described in the fol-

lowing sections, press the EXIT key to get to the display shown on the

left.

왘 Press the ENTER key to save your configuration and to exit the “

Booth

Configuration” menu.

Options

3 Mode between Booth

Mode between Booths

Mode = Override

Press ENTER to Save

Options

4 Mode in Booths

Mode in Booths

Mode = Mixed

Press ENTER to Save

Interpretation

1 Configuration

Save Config.

Yes

Press ENTER to Save

1 2 ... 92 93 94 95 96 97 98 99 100 101 102 ... 127 128

Comments to this Manuals

No comments

Sennheiser Microphone SDC 8200 User Manual Page 97

Comments to this Manuals

Related products and manuals for Musical Equipment Sennheiser Microphone SDC 8200