Sennheiser Microphone SDC 8200 User Manual download pdf (Page 29)

Operating the components of the SDC 8200 system

1. In “Direct Access” mode:

왘 Press the microphone key .

If the speaker limit has not yet been reached, you can take the floor

immediately. The red signal light ring  and the “Microphone active”

LED  on your console light up permanently, indicating that you can

now take the floor.

If the speaker limit has been reached, you have to wait until one of the

current speakers has finished speaking and passes on the “speaking

right”. You then have to press the microphone key  again.

2. In “Fifo” mode:

In this mode, the speaker limit is 1.

왘 Press the microphone key .

Pressing the microphone key on your console will automatically turn

off the microphone of the previous speaker (“first-in-first-out” princi-

ple). The red signal light ring  and the “Microphone active” LED  on

your console light up permanently, indicating that you can now take

the floor.

Note!

The chairman units and VIP units remain unaffectedly active.

3. In “Group 1” mode:

In this mode, the speaker limit is 1.

왘 Press the microphone key .

If no other participant is currently speaking, you can take the floor

immediately. The red signal light ring  and the “Microphone active”

LED  on your console light up permanently, indicating that you can

now take the floor.

If the speaker limit has been reached, you will join the waiting list and

the green “Request to speak” LED  on your console starts flashing. As

soon as the active microphone is turned off, the microphone of the first

participant from the request-to-speak list is turned on, and so on.

When it is your turn to speak, the red signal light ring  and the

“Microphone active” LED  on your console light up permanently.

4. In “Group 2” mode:

In this mode, the speaker limit is 2.

왘 Press the microphone key .

If the speaker limit has not yet been reached, you can take the floor

immediately. The red signal light ring  and the “Microphone active”

LED  on your console light up permanently, indicating that you can

now take the floor.

If the speaker limit has been reached, you will join the waiting list and

the green “Request to speak” LED  on your console starts flashing. As

soon as one of the active microphones is turned off, the microphone of

the first participant from the request-to-speak list is turned on, and so

on.

When it is your turn to speak, the red signal light ring  and the

“Microphone active” LED  on your console light up permanently.

















1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 127 128

Comments to this Manuals

No comments

Sennheiser Microphone SDC 8200 User Manual Page 29

Comments to this Manuals

Related products and manuals for Musical Equipment Sennheiser Microphone SDC 8200