Sennheiser Microphone SDC 8200 User Manual download pdf (Page 107)

Configuring the SDC 8200 system

107

Configuring the audio outputs for remote conferencing

To prevent echo during remote conferencing:

왘 Make sure that the two central units of the conference systems

installed in separate rooms are connected correctly (see “Setting up

remote conferences” on page 56).

왘 From the central unit’s operating menu, choose “

Aux-In/Out”.

왘 Choose the audio output “

Aux Out 1”.

왘 Choose “

Remote Conf.”.

The current setting (“

Remote Conf. = ON” or “Remote Conf. = OFF”)

is shown on the display.

왘 To prevent echo, choose “

Remote Conf. = ON” (if not yet chosen) and

press the ENTER key to save your setting.

Turning on/off an external equalizer

If you connect an external equalizer to the central unit, you have to acti-

vate the equalizer via the central unit’s operating menu.

왘 From the central unit’s operating menu, choose “

Aux-In/Out” and

“

External Equalizer” one after the other.

왘 Choose “

Status”.

The current status (“

ON” or “OFF”) is shown on the display.

왘 Choose “

Status = ON” and press the ENTER key to save your setting.

Note!

If the external equalizer is activated via the central unit’s operating

menu, the central unit outputs the audio signals of the consoles’ micro-

phones via the audio output and not via the consoles’ built-in loud-

speakers. However, if no external equalizer is connected, no audio

signals can be heard through the consoles’ built-in loudspeakers.

Adjusting the input level of an audio input

To adjust the input level of the two audio inputs:

왘 From the central unit’s operating menu, choose “

Aux-In/Out”.

왘 Choose the desired audio input.

왘 Choose “

Level”.

The current input level is shown on the display.

왘 Adjust the input level and press the ENTER key to save your setting.

Adjusting the input sensitivity of an audio input

Depending on the strength of the audio signal delivered by the external

audio source, adapt the input sensitivity as follows:

Aux Out 1

3 Remote Conf.

Aux Out 1

Remote Conf. = OFF

Press ENTER to Save

Aux-In/Out

9 External Equalizer

External Equalizer

Status = OFF

Press ENTER to Save

Aux In 1

1 Level

Aux In 1

Level = 00

Press ENTER to Save

1 2 ... 102 103 104 105 106 107 108 109 110 111 112 ... 127 128

Comments to this Manuals

No comments

Sennheiser Microphone SDC 8200 User Manual Page 107

Comments to this Manuals

Related products and manuals for Musical Equipment Sennheiser Microphone SDC 8200