Sennheiser Microphone SDC 8200 User Manual download pdf (Page 52)

Setting up the SDC 8200 system

This chapter provides information on how to set up and operate the

SDC 8200 conference and interpretation system.

Preparing the SDC 8200 system components for set up

Conference and interpreter consoles

After unpacking the consoles, you simply have to connect them to the cen-

tral unit and initialize them.

Central unit

왘 Connect the mains cable to socket .

왘 Connect the mains cable to the mains (100 – 240 V, 50 – 60 Hz).

Rack-mounting several SDC 8200 CU central units

For larger conference and interpretation systems with several SDC 8200 CU

central units, we recommend mounting the central units into a rack.

Warning! Danger of life-threatening electric shock!

If you connect the central unit to an ungrounded power

outlet, persons touching the central unit or units con-

nected to it may receive a life-threatening electric shock.

왘 Connect the central unit only to properly grounded

power outlets.



Caution! Danger of heat damage!

When rack-mounting the central units, please consider

that, during operation, the ambient temperature within

the rack may significantly rise above room temperature.

The central units can be damaged by high temperatures.

왘 The ambient temperature within the rack must not

exceed the temperature limit specified in the specifi-

cations.

왘 Make sure not to affect the ventilation required for

safe operation or provide additional ventilation.

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 127 128

No comments

Sennheiser Microphone SDC 8200 User Manual Page 52