Sennheiser Microphone SDC 8200 User Manual download pdf (Page 110)

Configuring the SDC 8200 system

110

Checking the communication within a cable string

To display if and on which port(s) a communications error has occured:

왘 From the central unit’s operating menu, choose “

System”,

“

Diagnostics” and “Port Errors” one after the other.

The ports “

P1“ to “P6“ with a respective symbol are shown on the dis-

play.

The symbols have the following meanings:

: A cable string with consoles is connected to the port.

: No cable string is connected to the port. If this symbol appears even

though a cable string is connected to the port, check if the cable string

is connected correctly.

[!]: A communications error has occured. This symbol only appears if a

cable string is connected to the port.

Configuring connected additional components

Turning on/off a camera control

If you connect an external camera control to the central unit, you have to

activate the camera control via the central unit’s operating menu.

To turn a connected camera control on:

왘 From the central unit’s operating menu, choose “

System” and “Camera

Control” one after the other.

The current status of the camera control is shown on the display.

왘 Choose “

Status = ON” and press the ENTER key to save your setting.

Turning on a connected control panel

instead of controlling the SDC 8200 conference and interpretations system

via a PC with software control, you can use a control panel (optional).

The control panel is a miniature physical representation of your conference

room, allowing you to turn on or off individual conference consoles, change

the volume, change the conference mode, display the status of the inter-

preter booths, etc.

The control panel will be custom tailored to your specific requirements.

To turn a connected control panel on:

왘 From the central unit’s operating menu, choose “

System” and

“

Control Panel” one after the other.

The current status of the control panel is shown on the display.

왘 Choose “

Status = ON” and press the ENTER key to save your setting.

Diagnostics

1 Port Errors

Port Errors

[!]

P1 P2 P3 P4 P5 P6

System

2 Camera Conrol

Camera Control

Status = OFF

Press ENTER to Save

System

3 Control Panel

Control Panel

Status = OFF

Press ENTER to Save

1 2 ... 105 106 107 108 109 110 111 112 113 114 115 ... 127 128

Comments to this Manuals

No comments

Sennheiser Microphone SDC 8200 User Manual Page 110

Comments to this Manuals

Related products and manuals for Musical Equipment Sennheiser Microphone SDC 8200