Sennheiser SDC 8000 SYS User Manual download pdf (Page 10)

Getting to know the software

The IM (Interpreter Management) software module

The IM software module is the software you require in order to configure,

monitor and control the interpretation system from your PC. With the

IM software module, you can:

y configure all parameters of the interpretation system,

y operate the interpretation system and monitor the status of the

interpreter consoles,

y send short text messages to the interpreters.

The licenses

When purchasing the software, you also purchase licenses for one or

several software modules. All licensed software modules are activated

automatically when you install the software.

You can upgrade your license(s) at any time to include additional software

modules (see “Upgrading the software license” on page 91).

Note:

If you license additional software modules, the corresponding menus

and buttons appear automatically. Please note that the menus and

buttons of all software modules are shown in this manual – including

those for which you have possibly no license.

The dongle

When purchasing the software, you also receive a dongle (hardware

license key). This dongle releases all licensed software modules for use on

all PCs in your network and must therefore be inserted into a free USB port

(or parallel port) of the master PC.

If the dongle is not inserted at startup, the “Hit CR to abort” dialog box

opens (see “Starting the program for the first time” on page 16).

If the dongle is inserted but cannot be detected due to the program

configuration, the “Waiting for master...” dialog box opens (see “Setting

the correct starting options” on page 16).

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 97 98

No comments

Sennheiser SDC 8000 SYS User Manual Page 10