Sennheiser SDC 8000 SYS User Manual download pdf (Page 13)

System requirements

The operating system required

The SDC 8000 software requires Windows NT, Windows 2000 or Windows

XP Professional.

Note:

Both programs (“Confsys” to control the conference system and

“IntSys” to control the interpretation system) require one free COM

port each (RS 232 interface)! The SDC 8000 software therefore does

not function on PCs which do not have at least one free COM port not

assigned to another software – e.g. Hotsync (software for data transfer

between a PC and a Palm PDA)!

The network

You can install the software on up to eight PCs in a network. One of these

PCs must be configured as the “master” (see “Configuring the PC in a

network” on page 35). The master PC gives you access to all functions of

the conference and interpretation system. The dongle must be inserted

into a free USB port of the master PC.

Up to two PCs can be configured as “slaves” (see “Configuring the PC in a

network” on page 35). A slave PC also gives you access to all functions. The

slave PCs do not require a dongle.

Up to five PCs can be configured as “video PCs” (see “Configuring the PC in

a network” on page35). A video PC does not give you access to the

functions of the conference and interpretation system. Projectors or

monitors connected to the video PCs are only for displaying data to the

delegates or guests. The video PCs do not require a dongle either.

Master

Slave

Video

LAN

Video

Slave

Video

Dongle

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 97 98

No comments

Sennheiser SDC 8000 SYS User Manual Page 13