Sennheiser SDC 8000 SYS User Manual download pdf (Page 14)

Preparing the conference system for use

Connecting the PC to the central unit

Please note that the program for controlling the conference system and

the program for controlling the interpretation system require a separate

RS 232 interface each. Therefore, there are two possibilities for PC

controlling your conference and interpretation system:

1. You connect a single PC to the central unit:

The PC has two free RS 232 interfaces. Both the program for

controlling the conference system and the program for controlling the

interpretation system are installed on this PC.

Additional slave or video PCs can be connected to the PC’s network

card via a local network (LAN).

2. You connect two PCs to the central unit:

The program for controlling the conference system and the program for

controlling the interpretation system are installed on two different PCs.

Each PC has a free RS 232 interface.

To connect PCs to the central unit:

왘 Make sure that the required serial interfaces are available and free. The

required interfaces must appear in the Windows Device Manager under

“Ports (COM & LPT)”. These interfaces must not be used by any other

software.

왘 Use one zero modem cable to connect the serial interface of the PC via

which the conference system is to be controlled to the COM 3 interface

쐇 of the central unit.

왘 Use the second zero modem cable to connect the serial interface of the

PC via which the interpretation system is to be controlled to the COM 1

interface 쐃 of the central unit.

Attention!

After you have connected the PC to the central unit, your conference

and interpretation system can be controlled via both the PC and the

central unit!

In order to avoid inconsistencies, please make sure that no parameters

are changed on the central unit!

Installing the software

To install the software on your PC or on different PCs in your network,

proceed as follows:

Attention!

If you want to install a newer version of the software, you first have to

remove the old version!

쐃

쐇

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 97 98

No comments

Sennheiser SDC 8000 SYS User Manual Page 14