Sennheiser TV Cables ADN User Manual download pdf (Page 41)

Configuring the conference system via the central unit

Permanent transmission errors must be eliminated immediately in order to ensure

trouble-free operation of your conference system. Follow the steps for error elimi-

nation described under the “System Load” menu item (see page 38). In addition,

check if other electronic devices in the proxim

ity of the conference system might

cause the errors.

You can manually reset the “ ” icon behind “Error Indication” to the default icon

(“ ”) (see page 40).

The error counter (“Break Counter”) incrementally counts all

errors an

d changes in

the conference system (e.g. added conference units). Based on the changes of the

counter’s counts, you can conclude on the error source (e.g. if the counter rapidly

increments when you wiggle the cable, this indicates a faulty cable).

You can manually reset the error counter (“Break Counter”) (see page 40).

Performing a manual self-test –

“

Start Self-Test”

If the central unit detects errors after swi

tch-on or during operation:

왘 Eliminate these errors (see page 34 and following).

왘 Perform a manual self-t

est by selectin

g “Yes” in the “Start Self-Test” menu

item. The conference is interrupted.

The central unit now checks if a reported error still occurs. If the error is elimi-

nated, the corresponding error icon goes off after the self-test. If the err

icon is still displayed, you have to take further steps to eliminate the error

(see page 34 and following).

Resetting the error counter –

“Reset Break Indication”

Possible settings: “Yes” or “No”

This menu item allows you to reset the error counter (“Break Count”) in the “Bus

Statistic” menu item (see page 39).

Resetting the display of

ta bus errors –

“Reset Error Indication”

Possible settings: “Yes” or “No”

This menu item allows you to manually reset the display of data bus errors (“Error

Indication”) in the “Bus Statistic” menu item to default (see page 39).



☺

Always perform the self-test after you have eliminated the reported

errors.

Select and call up the

“Diagnostics” submenu

Select and call up

the “Start Self-Test”

menu item

Select the desired

setting; apply the

setting

Diagnostics

Temperature

Bus Statistics

Start Self-Test

Yes

Start Self-Test

No No

Main Menu

System

Diagnostics

Select and call up the

“Diagnostics” submenu

Select and call up the

“Reset Break Indication”

menu item

Select the desired

setting; apply the setting

Diagnostics

Bus Statistics

Start Self Test

Reset Break Indication

Main Menu

System

Diagnostics

Yes

Select and call up the

“Diagnostics” submenu

Select and call up

the “Reset Error

Indication” menu item

Select the desired

setting; apply the

setting

Diagnostics

Start Self Test

Reset Break indication

Reset Error Indication

Main Menu

System

Diagnostics

Yes

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 120 121

Comments to this Manuals

No comments

Sennheiser TV Cables ADN User Manual Page 41

Comments to this Manuals

Related products and manuals for Supplementary music equipment Sennheiser TV Cables ADN