Sennheiser Microphone SDC 8200 User Manual download pdf (Page 109)

Configuring the SDC 8200 system

109

The row marked in grey shows the factory-preset standard configuration.

The column marked in grey shows the reference output OUT 1 and the

channel numbers assigned.

Example:

Your system accommodates 16 interpretation channels and you want

to output each interpretation channel via its own audio output. To do

so, you require two analog output units whose outputs have to be con-

figured as follows:

왘 The factory-preset standard configuration of the first analog output

unit remains unchanged (the channels 1 to 8 are output via the unit’s

outputs OUT 1 to OUT 8, the floor channel is output via output OUT 0).

왘 Make sure that the second analog output unit is not connected!

왘 Open the second analog output unit by removing the seven screws on

the top of the housing as well as the screw on the front panel with a

2.0 mm Allan key and lift the cover off the unit.

왘 Leave the two DIP switches in position “OFF” as shown in the illustra-

tion on the left.

왘 Use a screwdriver to set the rotary switch to position “9”.

왘 Close the housing and tighten the screws. In order to avoid that the two

analog output units are later confused, we recommend marking the

second analog output unit with a sticker.

왘 Connect the second analog output unit as described in the section

“Connecting several SDC 8200 AO analog output units to the SDC 8200

CU central unit” on page 58.

The channels 9 to 16 are output via the outputs OUT 1 to OUT 8 of the

analog output unit. The floor channel is output via the unit’s output

OUT 0.

Making a system diagnosis

Displaying the current port status

To display the status of the individual ports:

왘 From the central unit’s operating menu, choose “

System”,

“

Diagnostics” and “Port Status” one after the other and press the

ENTER key.

The display shows the ports “

P1“ to “P6“ with symbols indicating

whether or not a cable string with consoles is connected.

The symbols have the following meanings:

: A cable string with consoles is connected to the port.

: No cable string is connected to the port. If this symbol appears even

though a cable string is connected to the port, check if the cable string

is connected correctly.

Diagnostics

1 Port Status

Port Status

P1 P2 P3 P4 P5 P6

1 2 ... 104 105 106 107 108 109 110 111 112 113 114 ... 127 128

Comments to this Manuals

No comments

Sennheiser Microphone SDC 8200 User Manual Page 109

Comments to this Manuals

Related products and manuals for Musical Equipment Sennheiser Microphone SDC 8200