Sennheiser Microphone SDC 8200 User Manual Page 41

  • Download
  • Add to my manuals
  • Print
  • Page
    / 128
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 40
Operating the components of the SDC 8200 system
41
The F1, F2 and F3 function keys
The F1 and F3 function keys serve to lock the central unit.
To lock the central unit:
Make sure that the start display appears as shown on the left. If the
start display does not appear, press the EXIT key repeatedly until the
start display appears.
Simultaneously press the F1 and F3 function keys and keeps them
pressed for three seconds.
If you release the two function keys after three seconds, the “key”
symbol ( ) appears in the lower right corner of the display. The
operating menu of the central unit is locked and you cannot change the
settings of your conference.
To unlock the central unit:
Simultaneously press the F1 and F3 function keys and keeps them
pressed for three seconds.
If you release the two function keys after three seconds, the “key”
symbol ( ) disappears from the lower right corner of the display.
The operating menu of the central unit can be accessed at any time by
pressing the ENTER key (see “Working with the central unit’s operating
menu” on page 42), and you can change all settings of your confer-
ence.
The menu operating controls
The jog wheel and the ENTER and EXIT keys on the central unit
allow you to navigate through the central unit’s operating menu, to choose
settings and to enter and change values.
For a complete overview of all menus of the central unit, see “Introduction
to the central unit’s operating menu” on page 60 to 84.
>Lautstaerke =
P1 P2 P3 P4 P5 P6
>Lautstaerke =
P1 P2 P3 P4 P5 P6
Operating
control
Menu
level
To
Jog wheel
main menu choose a menu item
submenu
choose a menu item
or
choose the desired setting
ENTER key
main menu and
submenu
activate a selected menu item
or
save settings and return to the previous
menu level
EXIT key
main menu and
submenu
exit a menu item without saving the set-
tings and return to the previous menu
level
Page view 40
1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 127 128

Comments to this Manuals

No comments