Sennheiser SDC 8000 SYS User Manual download pdf (Page 34)

Configuring the conference system

will later be possible to clearly assign all printouts to a certain

conference.

To add up to two logos to the voting window:

왘 In the “Logo1” or “Logo2” box, specify the file path and the *.bmp file

of the logos.

The logos then appear one above the another on the top right of the

voting window (see “Loading the agenda file” on page 63).

Configuring the startup options

To set the program behaviour on startup:

왘 In the “Autostart” box on the “1” tab, click the desired option button

and specify the desired files under “Room file” and “Delegate file”.

y If you click the “OFF” option button, no configuration is loaded when

the program is started and the empty “SDC 8000” window appears.

This setting is recommended for conference systems with a

frequently changing configuration and changing delegates.

y If you click the “ON” option button, the synoptic view of the

conference room preset under “Room file” and the delegate data

selected under “Delegate file” are loaded automatically.

This setting is recommended for conference systems with an

unchanging configuration.

Configuring the conference mode

To preset a conference mode:

왘 In the “Mode” box on the “1” tab, click the desired option button.

y For information on the nine different conference modes, see

“Operating the delegate units” on page 25 of the SDC 8000 system

manual.

y You can also change the conference mode at any time during a

conference (see “Changing the conference mode during a

conference” on page 60) – however, this causes all consoles to turn

off automatically.

Configuring the speaker limit

To limit the number of simultaneously active consoles:

왘 In the “Max Micro ON” box on the “1” tab, click the desired option

button.

Note:

This concerns the “Direct Access” mode only!

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 97 98

No comments

Sennheiser SDC 8000 SYS User Manual Page 34