Sennheiser SDC 8000 SYS User Manual download pdf (Page 61)

Monitoring and controlling a conference

Example:

"C:\Programs\SDC8000\S_CM\Data\File.txt","2004-

01-01","12:00:00",""

"Micro","Badge","Name","Party"

4,1,"Archer","USA"

5,2,"Becker","GER"

6,3,"Miller","CAN"

To print the data of all inserted chip cards:

왘 From the “Present Badges” menu, choose “Print”.

All inserted chip cards are read and the data are printed in the order of

the microphone numbers.

Testing the loudspeakers of the conference consoles

To test the loudspeakers of the connected conference consoles:

왘 From the “Test” menu, choose “Test Generator ON”.

왘 The “Test Generator ON” button is displayed. All active consoles are

deactivated automatically. The central unit transmits a test tone which

is reproduced by all operational conference consoles.

To end the loudspeaker test:

왘 From the “Test” menu, choose “Testgenerator OFF” or click the “Test

Generator ON” button.

The “Test Generator ON” button disappears and the test tone stops.

To test the microphones of the connected conference consoles:

왘 From the “Test” menu, choose “Test all Microphones”.

The “Test all Microphones” button is displayed.

All active consoles are deactivated automatically. All operational

consoles are activated for approx. 1 second each. The microphone

number of the currently active console is displayed on the “Test all

Microphones” button and the signal light ring on the currently active

console lights up.

To end the microphone test:

왘 From the “Test” menu, choose “End Test all Microphones” or click the

“Test all Microphones” button.

The “Test all Microphones” button disappears and the microphone test

is ended.

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 97 98

No comments

Sennheiser SDC 8000 SYS User Manual Page 61