Sennheiser Microphone SDC 8200 User Manual download pdf (Page 103)

Configuring the SDC 8200 system

103

Resetting the interpretation system

You should reset the interpretation system each time you have made

changes to the configuration of the interpretation system via the central

unit. Resetting the interpretation system has no effect on the conference

system, i.e. you can make changes to the configuration of your inter-

preation system even during a conference.

To reset the interpretation system:

왘 From the central unit’s operating menu, choose “

Interpretation”

and “

Reset” one after the other.

왘 Press the ENTER key.

The interpretation system is reset and the saved configuration

becomes effective.

Configuring the audio inputs and outputs of the central

unit and the anaolog output unit

You can connect external audio sources such as a CD player, a microphone

with preamplifier etc. to the central unit’s audio inputs.

Instead of connecting an external audio source, you can connect the audio

output of a conference system installed in a separate room to carry out a

remote conference.

Via the audio outputs, you can connect e.g. a recording unit.

Via the “

Aux-In/Out” menu, you can configure the central unit’s audio

inputs and outputs for the connected equipment.

Choosing the audio inputs and outputs

The central unit features six audio outputs.

The output signal of the floor channel is always available at the output

AUX OUT 1. The output AUX OUT 1 is available at the XLR-3M socket  and

the 15-pole sub-D socket  (for the pin assignment of this socket, please

refer to page 57).

The outputs AUX OUT 2 - 3 - 4 - 5 - 6 are available at the 15-pole sub-D

socket  (for the pin assignment of this socket, please refer to page 57).

The two inputs AUX IN 1 and AUX IN 2 are available at the two XLR-3F sock-

ets  and .

To choose the audio output or input to be configured:

왘 From the central unit’s operating menu, choose “

Aux-In/Out”.

왘 Then choose between the following inputs and outputs:

왘 Press the ENTER key to activate the menu item.

Interpretation

3 Reset

Reset

Press ENTER to

perform Reset









Aux-In/Out

1 Aux Out 1

– Aux Out 1

– Aux Out 2

– Aux Out 3

– Aux Out 4

– Aux Out 5

– Aux Out 6

– Aux In 1

– Aux In 2

1 2 ... 98 99 100 101 102 103 104 105 106 107 108 ... 127 128

Comments to this Manuals

No comments

Sennheiser Microphone SDC 8200 User Manual Page 103

Comments to this Manuals

Related products and manuals for Musical Equipment Sennheiser Microphone SDC 8200