Sennheiser Microphone SDC 8200 User Manual download pdf (Page 45)

Structuring the SDC 8200 system

Note!

In the following examples, the standard length of “3 m” is always given

for the system cables between the conference consoles. However, it is

no problem to use other cable lengths or cables of differing lengths

within the same string.

To make sure that all consoles are supplied with a voltage of at least

30 V, please refer to the chapter “Determining maximum cable

lengths” on page 47.

Expansion stage (1): one central unit with up to 20 consoles

In small conference systems (expansion stage 1), up to 20 conference and

interpretation consoles can be interconnected in one string.

왘 Calculate the maximum cable length using the “Powercalc.exe” soft-

ware (see “Determining maximum cable lengths” on page 47) in order

to ensure that all consoles are supplied with sufficient voltage.

Expansion stage (2): one central unit with up to 120 or 50 consoles

In conference systems of expansion stage (2), up to six cable strings with

up to 20 consoles each (6 x 20 = 120) can be connected to a single

SDC 8200 CU central unit. This is the maximum number of consoles that

can be connected to a single central unit.

≤ 50 m

3 m 3 m

...

≤ 50 m

3 m

123

...

3 m

123

...

3 m

123

...

3 m

...

3 m

...

3 m

...

3 m

...

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 127 128

No comments

Sennheiser Microphone SDC 8200 User Manual Page 45