Sennheiser Microphone SDC 8200 User Manual Page 88

  • Download
  • Add to my manuals
  • Print
  • Page
    / 128
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 87
Configuring the SDC 8200 system
88
Selecting a conference mode
By selecting a certain conference mode, you can strongly influence the
character of a discussion:
y You determine the level of control of the chairman.
y You determine whether the conference participants can take the floor
any time or if they have to “apply” for comments.
Note!
By pressing the microphone key of his or her console, the chair-
man can take the floor any time, regardless of the conference mode
chosen. In addition, he or she can turn off all active microphones –
except for the VIP units – by pressing the priority key .
To choose the conference mode:
From the central unit’s operating menu, choose “
Conference” and
Operating Mode” one after the other.
The current conference mode is shown on the display.
Choose the desired conference mode and press the ENTER key.
Note!
The selection of the conference mode “No request” only makes sense if
your conference and interpretation system is PC controlled.
The conference modes “Direct Access”, “Fifo”, “Group 1” to “Group 4”,
“Override”, “With request” and “With Req. No clear” can also be chosen
if your conference and interpretation system is not PC controlled.
Setting the speaker limit
You have to set the speaker limit, i.e. the max. number of speakers who can
take the floor simultaneously, for the following conference modes:
y “No request”
y “With request”
y “With Req. No clear”
y “Direct Access”
y “Override”
From the central unit’s operating menu, choose “
Conference” and
Microphone Limit” one after the other.
The current number is shown on the display.
Choose the number of speakers who can take the floor simultaneously.
The number can be between 1 and 15.
Press the ENTER key to save your setting.
Adjusting the audio settings for the consoles’ built-in loudspeakers
Via the “
Loudspeaker” menu item, you can adjust the audio settings (vol-
ume, bass, middle and treble response) for the consoles’ built-in loud-
speakers.
Conference
1 Operating Mode
Operating Mode
4 Direct Access
Press ENTER to Save
Conference
2 Microphone Limit
Microphone Limit
Microphone Limit = 4
Conference
3 Loudspeaker
Page view 87
1 2 ... 83 84 85 86 87 88 89 90 91 92 93 ... 127 128

Comments to this Manuals

No comments