search

Sennheiser Microphone SDC 8200 User Manual Page 92

  • Download
  • Add to my manuals
  • Print
  • Page
    / 128
  • Table of contents
  • BOOKMARKS
    • Rated. / 5. Based on customer reviews
Page view 91
Configuring the SDC 8200 system
92
Testing the consoles’ built-in loudspeakers
Via the “
Test Tone” menu item, you can check if the consoles are con-
nected correctly and if the consoles’ built-in loudspeakers are working cor-
rectly.
To activate the test tone:
왘 From the central unit’s operating menu, choose “
Conference”,
“
Options” and “Test Tone” one after the other.
왘 Choose “
Status = ON”.
All loudspeakers produce the test tone.
왘 To change the volume of the test tone, choose “
Level”. You can choose
between “
High” and “Low”.
왘 To change the volume of the test tone, choose “
Frequency”. You can
choose between “
High” and “Low”.
왘 To deactivate the test tone, choose “
Status = OFF” and press the
ENTER key.
The test tone is deactivated.
Testing the consoles’ microphones
Via the “
Test Units” menu item, you can check if the consoles’ micro-
phones are working correctly
To activate the microphones:
왘 From the central unit’s operating menu, choose “
Conference”,
“
Options” and “Test Units” one after the other.
왘 Choose “
Status = ON”.
왘 All microphones are activated one after the other in the order in which
the consoles were initialized. The red signal light ring of the currently
active microphone lights up. After all microphones have been activated
once, activation re-starts with the first microphone.
Activating/deactivating the flashing of the signal light ring
If – in “With Request” or “With Req. No Clear” mode – a participant presses
the microphone key on his console, he makes a request to speak and
the green “Request to speak” LED starts flashing.
To activate the flashing of the signal light ring on all consoles:
왘 From the central unit’s operating menu, choose “
Conference”,
“
Options” and “Light Ring” one after the other.
왘 Choose “
Blink in Request” and press the ENTER key.
If a particpant makes a request to speak, the red signal light ring and
the green “Request to speak” LED on his console start flashing.
To deactivate the flashing of the signal light ring on all consoles:
왘 Choose “
OFF”.
If a particpant makes a request to speak, only the green “Request to
speak” LED on his console starts flashing.
Options
1 Test Tone
Options
2 Test Units
Options
3 Light Ring
Page view 91
1 2 ... 87 88 89 90 91 92 93 94 95 96 97 ... 127 128

Comments to this Manuals

No comments
Related products and manuals for Musical Equipment Sennheiser Microphone SDC 8200
Musical Equipment Sennheiser Microphone EW335G3 User Manual   (28 pages)
Musical Equipment Sennheiser SK 500 G2 Specifications    (37 pages)
Musical Equipment Sennheiser SK 5012 User Manual   (16 pages)
Musical Equipment Sennheiser EM 3532-U Service Manual   (35 pages)
Musical Equipment Sennheiser evolution wireless SR 300 User Manual   (3 pages)
  • Ciro VALERA Maeco Cyclades ZETA Music Systems
  • Liebert Video switches Intermec Network switches Sharp DVD players Magma Network equipment chassis Audio-Technica Microphone accessories
  • Dell D1920F Dell Latitude L400 Sony DSC-S650 Samsung MD55B Acer V6820M
  • Samsung GT-P6800 User Manual Cisco IP Communicator User Manual Cuisinart CWC-600 User Manual Black & Decker BDEMS600 Instruction Manual Electrolux EOC5651CAX User Manual