Sennheiser Microphone SDC 8200 User Manual download pdf (Page 99)

Configuring the SDC 8200 system

Enabling the auto-relay interpretation function (Auto-floor)

If the original floor language is a language of which all interpreters have a

complete understanding and from which they work, you do not have to

enable this function. In this case, all interpreters interpret the original floor

language into their respective target languages. These interpretations are

then fed to the corresponding interpretation channels.

If the original floor language is not a language of which all interpreters

have a complete understanding and from which they work, you can enable

the auto-relay interpretation function (auto-floor): The original floor lan-

guage is interpreted into a language understood by all interpreters. This

interpretation is automatically “relayed” to the floor channel of all other

interpreters and serves as the basis from which they interpret into their

respective target languages.

To enable the auto-relay interpretation function (auto-floor):

Note!

The interpreter who delivers the relay interpretation has to choose the

B-channel!

왘 From the central unit’s operating menu, choose “

Interpretation”,

“

Configuration” and “Select Booth” one after the other.

The current booth number is shown on the display.

왘 Choose the number of the booth from which the relay interpretation is

to be delivered and press the ENTER key.

왘 Choose “

Auto-floor” and press the ENTER key.

왘 Choose “

Yes” to enable the auto-floor function and press the ENTER

key to save this configuration.

The relay interpretation is automatically “relayed” to the floor channel

of all other interpreter consoles and the AUTOFLOOR LED on these

interpreter consoles lights up, indicating that the auto-floor function is

enabled.

Half-automatically initializing all interpreter consoles on the central unit

Once you have configured the number of interpreter booth (see “Setting

the max. number of interpreter booths/languages” on page 96) and the

number of interpreter consoles per booth (see “Setting the max. number

of interpreter consoles per booth” on page 96), you have to initialize all

interpreter consoles on the central unit as follows:

왘 From the central unit’s operating menu, choose “

Interpretation”,

“

Initialise Units” and “Full Init” one after the other.

The red signal light rings on all interpreter consoles start flashing and

the displays of the interpreter consoles show “

01” for both the booth

and the desk number.

1. If all of the interpreter consoles which were configured via the central

unit are connected, you can half-automatically initialize the inter-

preter consoles, i.e. by pressing the MIC key  of an interpreter con-

sole, this console is intialized on the central unit with the booth and

desk number shown on the console’s display.

Booth Configuration

3 Auto-floor

Booth Configuration

Auto-floor = Yes

Press ENTER to Save



Initialise Units

1 Full Init

Press Mic to confirm

BOOTH DESK

01 01

1 2 ... 94 95 96 97 98 99 100 101 102 103 104 ... 127 128

Comments to this Manuals

No comments

Sennheiser Microphone SDC 8200 User Manual Page 99

Comments to this Manuals

Related products and manuals for Musical Equipment Sennheiser Microphone SDC 8200