Sennheiser CONFERENCE AND INFORMATION SYSTEMS SDC 3000 Specifications download pdf (Page 83)

Creating, opening and saving configuration files

All conference-relevant information such as the names of the participants,

the seating arrangement, etc. as well as the configuration of the entire

conference system are saved in a configuration file. You can create and

save configuration files for conferences of all types and sizes.

In order to configure a conference, you will need approximately 1 1/2 to

2 minutes per conference console, i.e. configuring a conference with

45 participants will take 1 to 1 1/2 hours.

Note:

In order to be able to configure a conference, it is not necessary that

the conference consoles are connected.

When opening a previously created configuration on the PC of your

conference system, you only have to assign the microphone addresses

(see “Assigning microphones to the conference console icons” on

page 102) and start the conference management program. The

conference can now begin.

[New] Creating a new configuration file

Before you can control a conference via the SDC 3000 software for the first

time, you must first create a configuration file.

 Start the “SDC 3000” program.

The “SDC 3000” dialog box opens.

 Click the “Edit / Create Configuration” option in the “Select” box and

confirm your selection by clicking .

The configuration program starts.

 From the “File” menu, choose “New” or click [New Configuration] on

the toolbar.

1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 125 126

No comments

Sennheiser CONFERENCE AND INFORMATION SYSTEMS SDC 3000 Specifications Page 83